On 14 July 2010 the Italian utility Enel unveiled “Archimede”, the first Concentrating Solar Power (CSP) plant in the World to use molten salts for heat transfer and storage, and the first to be fully integrated to an existing combined-cycle gas power plant. Archimede is a 5 MW plant located in Priolo Gargallo (Sicily), within Europe’s largest petrochemical district. The breakthrough project was co-developed by Enel, one of World’s largest utilities, and ENEA, the Italian National Agency for New Technologies, Energy and Sustainable Economic Development.
Several CSP plants already operate around the world, mainly in the US and Spain. They use synthetic oils to capture the Sun’s energy in the form of heat, by using mirrors that beam sunlight onto a pipe where pressurised oil heats up to around 390°C. A heat exchanger is then used to boil water and run a conventional steam turbine cycle. Older CSP plants can only operate at daytime – when direct sunlight is available -, an issue that has been dealt with in recent years by introducing heat storage, in the form of molten salts. Newer CSP plants, as the many under construction in Spain, use molten salts storage to extend the plants’ daily operating hours. Archimede is the first plant in the world to use molten salts not just to store heat but also to collect it from the sun in the first place.
Read More
Carbon Commentary The world’s first molten salt concentrating solar power plant